Parts included with the kit:
2 x xenon lamp, also known as HID bulb, with wiring
2 x ballast
Super MINI Xenon Light Set
This kit contains everything you need to upgrade your existing car headlamp system to optimal lighting!
(Single beam does not require relay harness)
The kit rectifier uses the world's most advanced chip technology, MINI integrated design ballast / rectifier (rectifier volume is only 5.5 * 2.8 * 3CM). Integrating more high-quality components greatly enhances the life and stability of the product. Greatly reduce the volume of the ballast and reduce the space occupied by the car. Make installation easier and faster.
2 * Xenon HID bulb
2 * MINI ultra-thin HID ballast (rectifier ultra-thin ultra-mini design, easy to install)
All necessary wiring and connectors
Voltage input: 9-16V
Voltage range: 13.2V
Current specification: 4.2A
Maximum current: 6A
Power output: 55W
Working temperature: -40~ + 105 Centidrgee.
HID efficiency: 98.68%, 3,200 LM.
Life expectancy: 3,000 hours
Certification: E4 and ISO-9001: 2000 approval
Lamp size and color temperature available
Bulb size:9012 880 9005/HB3/H10 9006/HB4 H4/HB2/9003 H8/H9/H11 H7 H11 H3
Color temperature available:6000K/8000K
Please read this guide before attempting to install. By reading the outlined steps, you will be more prepared to install to reduce possible errors and problems. If you have any questions, please contact us.
Make sure your engine compartment is cool.
Make sure the car is parked and closed.
Be careful not to squeeze or cut the lamp wiring..
Do not connect the high voltage electrode when the light switch is turned on.
It is recommended to test each lamp function before final permanent installation.
Do not install the ballast near extreme heat or vibration, as it will shorten its life.
The light is not bright. Solution: The ballast plugs have the opposite polarity. This simply means flipping the elliptical plug inserted into the ballast. Unlike conventional halogen bulbs, the polarity of the ballast (-/+) is sensitive. Retest. If the problem persists, replace the ballast or lamp to diagnose the lamp or ballast. In many cases, it is not the HID kit, but the culprit of the vehicle. Some vehicles, such as For Chrysler/Dodge//BMW/Mercedes, may require additional wiring/eliminator plugs to mount the HID.
The light will then illuminate, flash or quickly turn off. Solution: In many cases, the HID kit is not the culprit, but the vehicle. Some vehicles, such as
For Chrysler/Dodge//BMW/Mercedes, may require additional wiring/eliminator plugs to mount the HID.